Frequently Asked Questions-Botou Special Pump Valve Manufacturing Co., Ltd.

Analyze the causes of stator failure in screw pumps

Botou Special Pump Valve Co., Ltd. explained that the main causes of stator wear in screw p...

Reasons for the instability of small flow rate in high-speed centrifugal pumps

The main reasons for the small flow instability phenomenon in high-speed centrifugal pumps ...

Reasons for leakage during mechanical seal trial operation

The specific reason for the leakage problem during the trial operation of mechanical seals ...

Analysis of the causes of leakage after installation of mechanical seals

If there is a leakage between the mechanical seal gland and the sealing box end face, check...

Reasons for cavitation in heavy oil pump

The process of generating bubbles and rapidly shrinking bubbles to the point of rupture and...

The impact of cavitation on CYZ self-priming centrifugal oil pump

CYZ self-priming centrifugal oil pump cavitation occurs, and when it develops to a signific...

Discussion on the reasons and treatment methods for the inability of self-primin

The reason why the self-priming centrifugal pump cannot suck up incoming water is due to ai...

Correction of Misconceptions during Maintenance of Mechanical Seals for Pumps

Relatively speaking, the effect of using a new mechanical seal is better than that of an ol...