Introducing the installation and trial operation of the slag oil pump for you

Slag oil pump; The rated pressure refers to the high allowable pressure at which the pump operates continuously, and its working pressure is determined by external loads. The lifespan of the slag oil pump is directly related to its working pressure. For gear pumps that do not work frequently, their working pressure can be taken as the rated pressure of the pump. Considering the different product qualities, it is better to reduce the rated pressure by 20% to 30% for use. The slag oil pump plays an important role and value in operation, and can be made and used according to the method and principle, demonstrating its important role and value in use. For slag oil pumps that often operate at higher pressures, their working pressure should be 1-2 pressure levels lower than the rated pressure of the pump. Petrochemical equipment often operates continuously for 24 hours, and the working pressure of the pump should be much lower than the rated pressure, and the working speed should also be lower than the rated speed. If the working pressure of the high viscosity gear pump is adjusted too high, it will cause the gear pump to operate under overload.