YHB-LY series vertical circular arc gear pump

The YHB-LY series vertical circular arc gear pump relies on a pair of double circular arc toothed gears to mesh and operate, and relies on the alternating volume of the cavity between the teeth to complete the suction and discharge of liquid medium. The equipment adopts a vertical direct connection structure, with the motor arranged vertically without the need for a horizontal base coupling. It is suitable for installation in limited space scenarios and is often equipped with a thin oil station and a forced lubrication system for the unit. It can operate continuously or intermittently.

The main components of the whole machine include the pump body, pump cover, vertical transmission main shaft, driven shaft, double arc gear, balance bearing assembly, shaft end seal, and built-in overflow structure. The gears undergo heat treatment processing, resulting in continuous contact between the tooth profiles and low relative slip on the tooth surfaces. The pump chamber is equipped with a pressure balance channel to reduce the axial force generated during operation and minimize bearing wear. The shell material can be selected from cast iron or stainless steel as needed; Insulation jacket can be added for conveying easily solidified media; Copper gears can be selected for specific working conditions. The internal moving components rely on the self lubrication of the conveying medium and do not require an independent lubrication system.

The power is directly driven by the vertical spindle to rotate the driving gear, and the driven gear rotates synchronously in the opposite direction. When the gear disengages from the meshing area, the cavity volume increases to form negative pressure, and the medium flows into the tooth groove; The medium is transported to the oil pressure area along with the gear, and the gear mesh compresses the cavity volume. The medium is compressed and transported outward, achieving continuous feeding through circulation. The flow rate is linearly related to the rotational speed, and when combined with a speed control device, the conveying capacity can be adjusted. The equipment has basic self-priming ability and can be started and stopped multiple times after the initial injection of medium.

The pump body is equipped with a built-in overflow structure. When the pipeline is blocked or the valve is closed, causing abnormal pressure rise, the medium flows back inside the pump to relieve pressure and reduce equipment damage caused by high pressure. This structure is only used for emergency overload protection and cannot be used for long-term voltage stabilization. When there is a need for constant pressure transmission, an external pressure regulating pipeline can be connected. The pump chamber flow channel is unobstructed, with fewer dead corners inside, making it easy to flush and clean.

The sealing scheme can be combined with the temperature and corrosion characteristics of the medium to select forms such as packing seal and mechanical seal. The whole machine adopts a split assembly structure. During maintenance, the pump cover can be disassembled to replace the seals, check the status of gears and bearings, and there is no need to dismantle the pipelines as a whole. The insulation style can be used for conveying viscous, low-temperature and easily solidified media.

Suitable for conveying liquid materials that do not contain hard particles, fiber impurities, and have fluidity and lubrication characteristics. The medium has a kinematic viscosity range of 5-1500mm ²/s and can transport fluids such as turbine oil, lubricating oil, diesel, fuel oil, etc. Not suitable for strongly corrosive media, media containing a large amount of solid particles, and low flash point volatile media.

The equipment adopts a vertical flange chassis for fixed installation, and the motor is arranged vertically upwards to save horizontal installation space. The lateral arrangement of the inlet and outlet pipelines is suitable for compact machine room layout. During installation, fix the chassis horizontally, calibrate the coaxial transmission status, and reduce vibration wear. It is recommended to install a filtering device in the suction pipeline to prevent impurities from entering the pump chamber. Before starting, the medium inside the pump chamber needs to be retained, and it is forbidden to idle for a long time. The pump body with insulation structure can preheat the chamber before conveying easily solidified materials.

Daily maintenance includes regular cleaning of filters, inspection of seal leaks, monitoring of operating temperature rise and vibration. After conveying viscous materials, use a clean medium to circulate and flush the pump chamber to prevent the materials from drying up and adhering. Long term shutdown requires the removal of residual media from the cavity to reduce the possibility of corrosion and material solidification.

Compared to the horizontal YHB-Y model, the vertical structure occupies less horizontal space and is suitable for limited working conditions such as computer rooms and oil stations; Compared with the conventional involute gear structure, the circular arc tooth profile has smaller operating pulsation, trapped oil phenomenon, and operating noise. Equipment is commonly used for forced lubrication and oil supply conditions in compressors, refrigeration units, and power station equipment.

What is the working pressure of YHB-LY series vertical circular arc gear pump?

Introduce the shaft end sealing structure of YHB-LY series vertical circular arc gear pump

Recommend some application cases of YHB-LY series vertical circular arc gear pump