What is the correct method for cleaning the bearings of an insulated asphalt pum

Regular cleaning is very important when using insulated asphalt pump bearings. How to properly clean bearings? When disassembling the bearing for inspection, first use photography or other methods to make a good appearance record. In addition, it is necessary to confirm the amount of remaining lubricant and sample the lubricant before cleaning the bearings. The cleaning of bearings is divided into coarse cleaning and fine cleaning, and a metal mesh can be placed at the bottom of the container being used. When cleaning, slowly rotate the bearing in the oil and be careful. When cleaning, use a brush or other lubricant or adhesive in the oil. If the bearing is rotated in oil at this time, be careful not to damage the rolling surface due to foreign objects or other factors. The commonly used cleaning agents are neutral, water free diesel or kerosene, and sometimes warm alkaline solutions are also used as needed. Regardless of the type of cleaning agent used, it is important to filter regularly to maintain cleanliness. After cleaning, immediately apply rust proof oil or grease on the insulated asphalt pump bearings.