NEWS-Botou Special Pump Valve Manufacturing Co., Ltd.

“齿轮泵”的工作和启动步骤

我们在使用齿轮泵工作时，齿轮泵停止运转后的保养与密封失效怎么回...

Structural characteristics of gear pumps and causes of motor overheating

The pump is equipped with a protective valve as overload protection, and the full reflux pr...

Layout of gear pump and method of cavitation allowance

For gear pumps arranged outdoors or semi outdoors, the gear pump is generally perpendicular...

The impact of the use of gear pump pipelines and the manufacturing of components

The net distance between one end or the side of the gear pump and the wall should not be le...

Requirements and mechanical seal failure factors after gear pump stops running

The shutdown of high-temperature gear pumps should be carried out according to the technica...

Selection considerations and installation of gear pumps

The standards and criteria for selecting gear pumps are based on their performance and stan...

Starting steps and maintenance of gear pump

Adjust the pressure of the overflow valve to below 1.0MPA and rotate it for about 10 second...

Explanation of End Face Clearance Issues and Materials in Gear Pumps

As the speed of the gear pump increases, the impact of increased end face clearance on volu...