Procurement Guide-Botou Special Pump Valve Manufacturing Co., Ltd.

Service life and fault analysis of gear pump during use

Maintain a gap between the two wheels, without friction or wear. The contact between rotors...

What are the precautions for disassembling and assembling the mechanical seal of

A gear pump is composed of a pump body, gears, shaft, valve, seal, etc. There are two types...

Starting steps and maintenance of gear pump

Adjust the pressure of the overflow valve to below 1.0MPA and rotate it for about 10 second...

Explanation of End Face Clearance Issues and Materials in Gear Pumps

As the speed of the gear pump increases, the impact of increased end face clearance on volu...

Reasons and startup steps for leakage during gear pump shutdown

After stopping the operation, the inlet valve of the pump should be closed, and the valves ...

Reasons for overheating of gear pump body and cleaning and maintenance methods a

High ambient temperature, small fuel tank capacity, and poor heat dissipation can all cause...

What are the advantages of a gear pump?

Gear pumps are suitable for various industries and transport a wide range of media. This ge...

Precautions for using gear pumps and characteristics of high-pressure calibratio

The suction height of the pump cannot exceed 0.5m....